Advance-adapters 50-8403 Manual de usuario descargar pdf

ADVANCE ADAPTERS INC. P/N: 50-8403

P.O. Box 247, 4320 Aerotech Center Way New Item: (3/93)

Paso Robles, CA 93447 PAGE 1 OF 3

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-01-14

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will

void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend

that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a

service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive

dealerships and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 51-8403 ADAPTER HOUSING 9" LG.

2. 1 52-1803 AOD OUTPUT SHAFT W/25 SPLINES (modified 52-1802 shaft)

3. 1 52-2706 SHAFT- AOD 88-93 OUTPUT TO 23 SPL.

4. 6 720010 SPECIAL METRIC BOLTS

5. 5 723704 3/8" LOCK WASHERS

6. 5 723722 H.H.C.S. 3/8"-16 x 1-1/4"

NOTE: This kit was updated to a spud shaft design on 10/01/14.

GENERAL INFORMATION:

This adapter kit can be used for the Bronco II V8 engine conversion installations that are replacing either the A4LD

automatic transmission. The overall length of the new AOD transmission case plus the length of the new adapter housing

will be the same overall length as the original A4LD. If you are attempting to use this transmission for replacement of the

original 5 speed, it may be necessary to modify the drive lines and transfer case location.

Every attempt has been made to duplicate the original AOD tailhousing. Before final assembly into the vehicle, you must

verify that the shift linkage clearance in the tailhousing is sufficient. A test on the linkage lever will make sure that the

proper clearances have been achieved.

The transfer case adapter has been furnished with a transfer case linkage mounting holes and crossmember support holes

identical in location to the original A4LD adapter. Slight modifications may be necessary.

The new shaft that we have supplied with this kit fits Ford AOD transmissions 1988 and newer AOD transmissions. In

1988, Ford made some major changes to the oiling system that required a different main shaft and different valve and spring

kits. We have talked to a few different transmission shops concerning the requirement that all transmissions must be

equipped with the newer style shaft. It is the general consensus that this new design be used on the high performance

type applications, but for most installations, the older style shaft and governor assemblies are adequate. We have attached

a reprint article from SUPER Ford dated May 1990, that discussed the necessary changes and the advantages of using

the newer style shaft. We have also attached the information supplied by Ford Motor Company for changing of the valve

and spring assemblies when using the newer style shaft.

FORD AOD 4 SPEED OVERDRIVE AUTOMATIC

TO BORG WARNER BRONCO II & RANGER T/C

1 2 3

KIT CONSISTS OF: 1

Indice de contenidos

Pagina 1 - KIT CONSISTS OF:

ADVANCE ADAPTERS INC. P/N: 50-8403P.O. Box 247, 4320 Aerotech Center Way New Item: (3/93)Paso Robles, CA 93447 PAGE 1 OF 3Telephone: (800) 350-2223

Pagina 2

FORD AOD 4 SPEED OVERDRIVE AUTOMATICTO BORG WARNER BRONCO II & RANGER T/CSPECIAL NOTE: The components packaged in this kit have been assembled and

Pagina 3

A.O.D.INTERCHANGEABILITYWhen using this output shaft to service 1983-87 transmission models, rework the governorassembly using the supplied valve and

Comentarios a estos manuales

Sin comentarios

Advance-adapters 50-8403 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Advance-adapters 50-8403. Advance Adapters 50-8403 User Manual [en] Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Para El Coche Advance-adapters 50-8403