Advance-adapters 716104 Manual de usuario descargar pdf

ADVANCE ADAPTERS INC. P/N: 716104

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 1

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-01-93

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that

you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service

manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships

and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 716104 CLUTCH DISC

2. 1 GM001 S10/S15 INSTRUCTION MANUAL

NOTE:

This special clutch disc has specially been manufactured for Advance Adapters. We have supplied you with the

Chevy conversion booklet that will direct you with the proper installation into the Chevy bellhousing. Caution should

be given to make sure that the clutch splines on the input shaft have sufficient clearance with the inner hub of the

clutch disc hub. There are 11" clutch discs available that are offered with the anti-chatter clutch hub that we have

had considerable difficulty in using on the S10 conversions. This disc has performed outstanding when used with

the Chevy V8 engine conversions. This disc can also be used on 11" flywheels and pressure plates without any

difficulty. We do recommend a 10-1/2" pressure plate. On S10 conversions using the manual transmission, you must

use a bellhousing that has a slave cylinder clutch control. We recommend the GM bellhousing used on trucks 1989

and newer. The slave cylinder is located on the lower right hand side (passenger side) of the vehicle. We offer this

bellhousing as Part No. 712547. The GM part numbers are available in both the Advance Adapter Buyer's Guide

and S10 Instruction Manual.

When using the T4 or T5 original transmission with the new Chevy bellhousing, you will be required to make two

modifications to the front of the original transmission. The input shaft must be shortened and the front bearing collar

must also be shortened. Refer to the sketch below, or the S10 Instruction Manual for specific requirements.

SPECIAL CENTERFORCE CLUTCH DISC

10-1/2" DIA. X 1"-14 SPLINE

Indice de contenidos

Pagina 1 - No. Qty Part No. Description

ADVANCE ADAPTERS INC. P/N: 716104P.O. Box 247, 4320 Aerotech Center WayPaso Robles, CA 93447 PAGE 1 OF 1Telephone: (800) 350-2223 Fax: (805) 238-420

Comentarios a estos manuales

Sin comentarios

Advance-adapters 716104 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Advance-adapters 716104. Advance Adapters 716104 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Para El Coche Advance-adapters 716104