Advance-adapters 716008 Manual de usuario descargar pdf

KIT CONSISTS OF:

No. Qty Part No. Description

ADVANCE ADAPTERS INC. P/N: 716008

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 2

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-29-01

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to

any of the components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required

to complete your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be

used for the assembly of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque

values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships and parts stores.

1. 1 Kit 713010-NS NEO-PRENE MOUNTING KIT

2. 1 716008-PLT MOUNTING PLATE

3. 2 723722 H.H.C.S. 3/8"-16 x 1-1/4" LONG

4. 2 723735 3/8" FLAT WASHERS

5. 2 724303 7/16" LOCK WASHER

6. 2 724349 H.H.C.S. 7/16"-14 X 1-1/2" LONG

NEW TRANSMISSION CROSSMEMBER SUPPORT

NP231 WRANGLER VEHICLES

NOTE:

This transmission support mount is designed around the use of the Advance Adapters

transmission to transfer case housings. When used on Wrangler transfer case kits, the original

transmission support and snubber can be eliminated. New holes will need to be drilled into the skid

plate. We have provided four different hole locations for your selection. If necessary, new holes

could be drilled at a different location. Once the mount is on the adapter housing, you will then be

able to locate the holes in the skid plate area. On some installations that require additional skid plate

clearance, it may be necessary to use some square structural tubing between the adapter and new

crossmember bar. We have illustrated this in the optional design drawing illustrated below. On CJ5

and CJ7 vehicles 1980-86, we use a similar kit Part No. 716021 that offers a narrower stance.

SPECIAL NOTE: As of 05-27-99, the rubber mount kit has been changed to a 1-1/4" index hole. Kits

purchased before this date will require a 1-1/8" index hole, P/N 713008-NS.

1 2

NP231 WRANGLER VEHICLES 1

Indice de contenidos

Pagina 1 - NP231 WRANGLER VEHICLES

KIT CONSISTS OF:No. Qty Part No. DescriptionADVANCE ADAPTERS INC. P/N: 716008P.O. Box 247, 4320 Aerotech Center WayPaso Robles, CA 93447 PAGE 1 OF 2Te

Pagina 2

ADVANCE ADAPTERS INC. P/N: 716008P.O. Box 247, 4320 Aerotech Center WayPaso Robles, CA 93447 PAGE 2 OF 2Telephone: (800) 350-2223 Fax: (805) 238-4201

Comentarios a estos manuales

Sin comentarios

Advance-adapters 716008 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Advance-adapters 716008. Advance Adapters 716008 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Para El Coche Advance-adapters 716008